進口法蘭鍛造閘閥(德國OLES奧萊斯閥門)

【進口法蘭鍛造閘閥】詳細說明：

閘閥的啟閉件是閘板，閘板的運動方向與流體方向相垂直，作為截止介質使用，在全開時整個流通直通，此時介質運行的壓力損失小。閘閥通常適用于不需要經常啟閉，而且保持閘板全開或全閉的工況，不適用于作為調節或節流使用。閘閥流體阻力小，適用的壓力、溫度范圍大，介質流動方向不受限制，密封性能良好。廣泛適用于食品、醫藥、石油、化工、天然氣、鋼鐵、環保、造紙等輸送管路中做介質切斷或流通

The opening and closing part of the gate valve is the gate. The movement direction of the gate is perpendicular to the direction of the fluid. It is used as the cut-off medium. When the gate valve is fully opened, the whole flow is through, and the pressure loss of the medium is the smallest. Gate valves are generally suitable for conditions that do not require frequent opening and closing and keep the gate fully open or closed. They are not suitable for use as regulation or throttling. The gate valve has small fluid resistance, wide range of pressure and temperature, unlimited flow direction of medium and good sealing performance. Widely used in food, medicine, petroleum, chemical industry, natural gas, iron and steel, environmental protection, paper and other transportation pipelines as media cut off or circulation

【進口法蘭鍛造閘閥】?jī)?yōu)點：

1、流體阻力小 , 密封面受介質的忡刷和侵蝕小。 　　

2、開閉較省力。 　　

3、介質流向不受限制 , 不擾流、不降低壓力。 　　

4、形體簡單 , 結構長度短，制造工藝性好，適用范圍廣。

【進口法蘭鍛造閘閥】結構形式：

1.全通徑或縮徑

2.自密封閥蓋

3..明桿帶支架

4.兩端自動調整的填料壓套；

5.本體倒密封

6.整體閥體法蘭

7.環連接閥體閥蓋墊片

【進口法蘭鍛造閘閥】特性：

法蘭鍛鋼閘閥有三種閥蓋設計形式。*種是螺栓式閥蓋，按這種設計形式設計的閥門，其閥體與閥蓋用螺栓螺母連接，纏繞式墊片(316夾柔性石墨)密封，客戶有特殊要求時也可采用金屬環連接；第二種設計形式是焊接式閥蓋，按這種設計形式的閥門，其閥體與閥蓋用螺紋連接，全焊密封；第三種是壓力自緊式閥蓋，按這種設計形式設計的閥門，其閥體與閥蓋用螺紋連接，內壓自密封環密封