一、設備介紹

本凈化器是一款專為工業廢氣專業處理車間因生產產生的煙塵及輕質顆粒而設計的一體化凈化裝置。設備核心部件主要采用活性炭吸附凈化裝置和靜電吸附，既能有效去除廢氣中的有害物質和污染顆粒等，又能降解各種異味和各種含金屬加工廠生產出的有毒有害氣體。

二、工作原理

設備有進氣口和出氣口兩端。需生產廢氣經進氣口進入中效過濾網板內，煙塵廢氣中的部分煙塵或顆粒先有過濾網板過濾攔截，而后煙塵廢氣進入板框式一級蜂窩活性炭過濾器進行初效過濾及吸附。此時，大部分的大顆粒較重的粉塵被過濾至板框過濾器表面，其他含有細微顆粒的異味型氣體從板框過濾器的內表面經活性炭層層過濾后由另一外表面排出，匯合后進入板框式二級蜂窩活性炭過濾器進行高效過濾、吸附及深度凈化。此時，大部分的微小顆粒及粉塵被過濾至板框過濾器表面，未處理完的異味性氣體從板框過濾器的內表面經活性炭層層過濾后由另一外表面排出至出風口。板框式活性炭過濾器采用二級串聯處理方式，有效的擴大了廢氣同活性炭接觸面積的同時很大程度的提高了廢氣吸附及凈化效果，再由高壓靜電吸附進行處理。

設備內部的初效過濾網板固定在設備的進風口位置，板框過濾器采用抽屜式設計，同時設有檢修門，打開可清理、清洗或更換板框過濾器。板框過濾器安裝在特制的框架上，由若干活性炭蜂窩海綿組成一個過濾單元，形成多級凈化單元，再由若干單元拼裝成化學過濾段。板框過濾器的金屬殼體采用金屬材質，可以重復使用，這種設計大大降低了用戶的運行費用。

三、應用范圍

廣泛應用于化工、電子、金屬加工、煙草、玻璃、制藥、食品加工、凈化室等因生產產生的廢氣或不銹鋼及管道加工、鋁等金屬焊接時產生的含鉛、錫等煙氣、廢氣或粉塵或煙霧處理場所。

1. Introduction of equipment

The purifier is an integrated purification device specially designed for industrial waste gas to deal with smoke and light particles produced in workshop. The core components of the equipment are mainly activated carbon adsorption purification device and electrostatic adsorption, which can effectively remove the harmful substances and pollution particles in the waste gas, and can also degrade various odor and all kinds of toxic and harmful gases produced by various metal processing plants.

Two. The principle of work

The equipment has air intake and air outlet ends. The exhaust gas is required to enter the medium effect filter plate through the intake air inlet, and some of the dust or particles in the smoke and dust exhaust are first filtered and intercepted, and the smoke and dust gas enters the first stage honeycomb activated carbon filter of the plate frame to carry out the initial filtration and adsorption. At this time, most of the heavier particles are filtered to the surface of the plate frame filter, and the other odor gas containing fine particles is filtered from the outer surface of the inner surface of the plate frame filter through the activated carbon layer and then into the plate frame type two stage honeycomb activated carbon filter for efficient filtration, adsorption and depth. Purify. At this time, most of the tiny particles and dust are filtered to the surface of the plate frame filter, and the untreated odor gas is filtered from the other surface to the outlet from the outer surface of the inner surface of the plate frame filter. The plate frame type activated carbon filter has two stages in series treatment, which effectively expands the contact area of the exhaust gas to the activated carbon, and greatly improves the effect of the adsorption and purification of the exhaust gas, and then the high voltage electrostatic adsorption is used to deal with it.

The initial filtering net plate inside the equipment is fixed in the air inlet position of the equipment. The plate frame filter adopts the drawer style design, and the repair door is set up at the same time, and the plate frame filter can be cleaned, cleaned or replaced. The plate frame filter is installed on the special frame, which consists of a number of activated carbon honeycomb sponges to form a filter unit, forming a multi-level purification unit, and then assembled into a chemical filter section by a number of units. The metal shell of the frame filter is made of metal material and can be reused. This design greatly reduces the operation cost of the user.

Three. Application scope

It is widely used in chemical, electronic, metal processing, tobacco, glass, pharmaceutical, food processing, purification room and other products produced by the production of exhaust gas or stainless steel and pipe processing, aluminum and other metal welding of lead, tin and other flue gas, waste gas or dust or smoke treatment places.