船用控制電纜CKVV/DACKVV82/DACKVV92/DA本產品適用于交流額定電壓250V及以下的各種船舶及
海上石油平臺等水上建筑物，用于對干擾不敏感的電路。 It is used for the circuit insensitive to interference
of AC rated voltage 250V or lower for ships, offshore
platform and other building over water.
一、生產執行標準 GB9332-88(IEC92-356) Executive standard: GB9332-88(IEC92-356)
二、使用條件 Working Condition
1、電纜的長期允許工作溫度,聚氯乙烯絕緣電纜為70℃；
交聯聚乙烯絕緣電纜為90℃；
2、敷設時電纜的zui小彎曲半徑；
金屬屏蔽鎧裝型（電纜外徑D為任何值）為6D；
非鎧裝型（電纜外徑D≤25）為4D；
（電纜外徑D＞25）為6D。
1: Long term working temperature allowed by cable
is 60℃.
2: Min. bending radius of cable for installation is 6
times that of cable OD for cable with metallic shielding
and armoring(D is for any value.)and 4 times that of cable
OD for cable without armoring(D≤25 ); Min. bending radius of cable for installation is 6 times that of cable OD(D
＞25 ).
Note: D means outer diameter of cable 三、型號、名稱及敷設要求 Type, Descr ipt ion and Installat ion
Requirements
型 號
Type
名 稱
Description
敷設要求
Installation requirements
CKVV/DA
聚氯乙烯絕緣聚氯乙烯護套船用控制電纜
Control cable with PVC insulation and sheath for ship
固定敷設特性代號：
D-符合單根垂直燃燒
試驗
CKVV80/DA
聚氯乙烯絕緣和護套裸銅絲編織鎧裝船用控制電纜
Control cable with PVC insulation and sheath, bare copper wire braiding and
armoring for ship
CKVV82/DA
聚氯乙烯絕緣銅絲編織鎧裝聚氯乙烯護套船用控制電纜
Control cable with PVC insulation and sheath, copper wire braiding and armoring for
ship
CKVV90/DA
聚氯乙烯絕緣聚氯乙烯內套裸鋼絲編織鎧裝船用控制
電纜
Control cable with PVC insulation and inner sheath, bare steel wire braiding and
armoring for ship
CKVV92/DA
聚氯乙烯絕緣聚氯乙烯內套鋼絲編織鎧裝聚氯乙烯
護套船用控制電纜
Control cable with PVC insulation and inner sheath, PVC outer sheath, steel wire
braiding and armoring for ship
CKJV/DA
交聯聚乙烯絕緣聚氯乙烯護套船用控制電纜
Control cable with XLPE insulation and PVC sheath for ship
固定敷設特性代號：
D-符合單根垂直燃燒
試驗
CKJV80/DA
交聯聚乙烯絕緣和護套裸銅絲編織鎧裝船用控制電纜
Control cable with XLPE insulation and sheath, bare copper wire braiding and
armoring for ship
CKJV82/DA
交聯聚乙烯絕緣銅絲編織鎧裝聚氯乙烯護套船用控制電纜
Control cable with XLPE insulation and PVC sheath, copper wire braiding and
armoring for ship
CKJV90/DA
交聯聚乙烯絕緣聚氯乙烯內套裸鋼絲編織鎧裝船用
控制電纜
Control cable with XLPE insulation and PVC inner sheath, bare steel wire braiding
and armoring for ship
CKJV92/DA
交聯聚乙烯絕緣聚氯乙烯內套鋼絲編織鎧裝聚氯乙烯護套船用控制電纜
Control cable with XLPE insulation and PVC inner sheath, PVC outer sheath, steel
wire braiding and armoring for ship、規格范圍 Speci?cation Range
型號
Type
芯數
Core number
截面mm2
（根數/單絲直徑）
Cross section area (pieces/diameters of single piece )
所有型號
All types
2、4、7、10、14、19、24、30、37
0.75（7/0.37）、1.0（7/0.43）
1.5（7/0.52）、2.5（7/0.68）
四、船用控制電纜CKVV/DACKVV82/DACKVV92/DA技術要求 Technical Requirements
1、電纜應經受交流電壓1500V或直流電壓3600V，5min
的電壓試驗；
2、電纜具有符合GB、T19666-2005單根垂直燃燒試驗
性能要求；
3、C K V系列電纜在2 0℃時絕緣電阻常數不小于
36.7MΩ.km；CKJ系列電纜在20℃時絕緣電阻常數不小于
3670MΩ.km。
1: Cable should bear voltage test of AV 1500V or DC
3600V for 5min.
2: Vertical burning test performance for single piece
shall meet the requirement of GB/T19666-2005 standard.
3: Insulated resistance constant is no less than
36.7MΩ.km at 20℃ for CKV series cable and 3670MΩ.
km at 20℃ for CKJ series cable.
六、交貨要求 Delivery length
按雙方協議規定，長度計量誤差為±0.5%。 According to the agreement between both parties
with length error of ±0.5%.