久久婷婷国产综合精品,日韩欧美内精品一区二区三区

光浸潤(rùn)測(cè)試機(jī) Light soaking

High performance full-circulation temperature control system conforms to CCC light source classification IEC standards.

TThe light-soaking test for thin-film solar modules is also required to stabilize the electrical characteristics of the thin-film modules.
IEC61646 specifies that each module must be exposed to light soaking test up to 43kW/hr and the module temperature must be controlled at 50℃±10℃. IEC 60904-9 specifies that the light source classification must be at least CCC class.

HONGZHAN Technology not only conforms to the spectral match, non-uniformity, and temporal instability CCC classification light source requirements but also utilizes the air-cooled full-circulating temperature control system and PID fan control mode to accuray control the temperature to within ±2℃ of the required specification.

Modules: （1） Single module type （2） Dual module type

Single Module LS1411 can perform a light-soaking test on a single module.

?	PID fan control mode; cooled water and heat collection cover for effective cooling and temperature control.
?	Monitoring and logging of raw data from the temperature trend chart and output to USB port for analysis.
?	Even exposure at 800~1000W/m2 within the area of illumination.
?	Easy-to-use human-machine interface, with built-in English, Traditional Chinese, and Simplified Chinese control interfaces.
?	If the temperature of the back plate module exceeds 60℃, the system will automatically turn off the lamp to prevent further damage from excessive temperature.
?	EMO emergency switch to compley shutdown power to the entire system in an emergency situation.

Dual Module LS2214 can perform light-soaking test on dual modules simultaneously.

?	Walk-in chamber design with automatic internal heat exchange and circulation to effective control the internal temperatures.
?	Module testing table with 0~5cm adjustable feet. Height of the reference cell can also be adjusted to fit different modules and ensure precision of the measurement.
?	Thermal camera for monitoring surface evenness of temperature.
?	Added power socket at the ground level.
?	Individual controls for the illumination and module temperature. Data output from the USB port.
?	Added cold air protection device and door-open alarm.